DUOBLADE WX

If speed is too high, quality can be poor.

This error shows when unwinder roll reaches pre-defined core diameter size. This parameter can be adjusted by user in below window. (unit : mm)

If feeding is perfectly straight, you will need 54 meters of leading loss like blue lines of media path diagram as below.

Interval number means how many cutting jobs will be done until cutter will be reset (go back to origin position to initialize cutting position).

When you have different cutting depth partly, it can be caused by instable pressure of cutting head solenoid.  Head up/down movement pressure can be irregular due to the bent bolts of solenoid part. Long bolt to synchronize movement of solenoid and knife holder is a kind of consumable and you need to replace it when you have this kind of issue. Please refer to below linked note for this problem.

When you adjust the height of camera, pixel scale needs to be changed.

If you have arcs or round corners or circles cut unsmoothly or there're waves on the curves, you can adjust software parameter first then check part status as below. Regular maintenance is very important.

To keep the machine in good condition all the time, regular maintenance is important.

WhatsApp Video 2022-10-28 at 3.13.08 PM.mp4

Reported from one of the 3 WX that was sold to tasco.