DUOBLADE WX
DUOBLADE WX [Tips] If the label is bent when cutting the label after laminating
If the label is bent when cutting the label after laminating, try adjusting the tension in the cutting program.
DUOBLADE WX [Tips] : Mark alignment during printing
Marks to sense should be in the same position (gap from the paper edge) for every different job.
DUOBLADE WX [Tips] : Why to use 2 cutting marks?
Many times, users print just 1 black mark to save media loss like below.
DUOBLADE WX [Tips] : How to upgrade the software
If the machine was manufactured before March, 2021, the cutting software doesn't support some options.
DUOBLADE WX [Troubleshooting] : When cutting stops in the middle
reduce bend speed
DUOBLADE WX [Troubleshooting] : Black mark sensing error when starting cutting job
Refer the following steps
DUOBLADE WX [Troubleshooting] : When cutting edge is rough and scratched?
If you are cutting thick media, even with laminating, maybe 9U know would not work well. 09U45 knife can cut up to 150~200 micron only. For thicker media, please use 15U knife.
DUOBLADE WX [Tips] : How to copensate offset value at corners?
You can meet overshooting problem at corners during cutting.
DUOBLADE WX [Tips] : Matrix separation roller is scratching the printing surface
In DUOBLADE WX, matrix separation roller is upgraded to provide blade separation option and roller separation option together, to provide more flexibility to users depending on the label size, shape and adhesive power.
DUOBLADE WX [Troubleshooting] : Changing head distance motor
If you have head shaking problem (loosened head-distance motor from the screw), you can have a quality problem with head 2~4. So if you compare the result of cutting head 1 and other heads, 1 is ok but 2~4 have problems, you can doubt this problem.
